HomeSoil seriesTruce

Truce soil series

Truce soils cover 318,991 mapped acres, almost all of them in Texas. USDA rates shrink-swell a limit for houses without basements on 47% of that land, and a shallow water table a limit for basements on 0%.

It is the leading soil series by area in 8 of the counties and cities on this site.

SSURGO survey versions to August 5, 2026 · series description revised 2013-11

47%

of its land: shrink-swell limits houses without basements

0%

of its land: a shallow water table limits basements

5%

median highest linear extensibility (6% and up is high)

45%

median highest clay content in the top 150 cm

USDA's description

The Truce series consists of soils that are deep over claystone bedrock. These well drained, slowly permeable soils formed in loamy colluvium and/or slope alluvium over clayey residuum derived from claystone of Pennsylvanian age. These soils are on gently sloping to steep, convex ridges. Slopes are typically 1 to 5 percent, but range from 1 to 40 percent. Mean annual precipitation is about 813 mm (32 in) and the mean annual air temperature is about 18.3 degrees C (65 degrees F).

Source: USDA NRCS series description (OSD) for Truce, revised 2013-11. Read it.

Engineering properties

Mapped area (SSURGO)318,991 acres
Shrink-swell limits houses without basements47.0%
Shallow water table limits basements0.0%
Very limited for septic absorption fields85.5%
Most common drainage classWell drained
Most common hydrologic soil groupC
Taxonomic classFine, mixed, active, thermic Udic Paleustalfs
Type locationErath County, Texas

Where Truce is mapped

StateMapped acres
Texas318,991

Places where Truce leads

Counties and cities where Truce covers more mapped land than any other series.

Other places where Truce is a main soil

Counties and cities where Truce is among the six soil series covering the most mapped land, but not the first. Share of the place's mapped land.

Counties

Texas and Ohio cities

Sources

Shares and properties: USDA NRCS SSURGO via Soil Data Access, weighted by each component's share of its map units. Description: the USDA NRCS series description. How we count.